How do I configure Static DHCP on my router?

NOTE: When creating a Static DHCP entry, the IP address that you choose to have assigned needs to be in the range of the DHCP scope. Entries created with IP addresses outside of this range will not take effect.

Step 1 Open your web browser and enter the IP address of your D-Link router (192.168.0.1). Enter username (admin) and your password (blank by default).

Step 2 Click on the Home tab and then click DHCP on the left column.

Step 3 Under the Static DHCP section next to DHCP Client, select one of the DHCP clients from the list and click Clone.

Step 4 Select Enabled and enter the IP address you would like this client to always obtain.

Step 5 Verify that the Name and MAC Address fields have the correct Hostname and MAC address for the client and click Apply.   If the Hostname or MAC address is not correct, Release and Renew the IP address on the client and then refresh the DHCP page.

· How do I release and renew the IP address on my Win 95, 98, or Me computer?

· How do I release and renew the IP address on my Win NT, 2000, or XP computer?